DIY Solutions to Asphalt Damage: Fixing Alligator Cracks

There will be times that we experience discomfort whenever we drive from the garage to the outside of our property. This is because the asphalt pavement that we have in our areas has turned damage. Are you experiencing some cracks, potholes, and damage seal? When it comes to problems like these, it is important that you contact professional pavers, as doing DIY may never be easy to do. You may consider hiring a driveway repair Cape Coral, as they provide the best quality of work when it comes to repairing and installation of asphalt pavement and roadway.

The following is the step by step overview of how to repair your own damaged driveway:

Fixing alligator cracks

For this kind of problem, you will need a seal coat, an alligator patch, and a squeegee. As a rule of thumb, you will need to have one gallon of alligator patch for a 20 square feet area. However, it is important that you consult a professional and ask how much you will be needing for a specific area.

Alligator cracks need a quality seal coat, so do not settle for anything cheap in the market.

For the asphalt squeegees, you may use the standard sizes which are 24 inches and 36 inches, although you can also use your own old paintbrush to reach some places your squeegee cannot reach. Asphalt squeegees are affordable so there is no need to pay much for this tool.

The following are the step by step instructions

1.Clean first the area that needs fixing

Clear out some debris, dirt, weeds, and other material that will hinder the whole repair process. You may use different cleaning tools such as leaf blower, or a broom. While a pressure washer is effective in removing dirt, take note that putting water into the cracks can have negative results. Make sure that the driveway is dry.

2.Lay the patch

Pour down the patch and fill in the cracks and use your squeegees to spread the patch evenly on the surface about 1/8 to 1/4 thick. After you can use the scraper to level off and spread to the surface the patch. Wait for several hours or until the material has dried.

3. Put seal coat

Use the sealant you purchased 4 to 8 weeks after putting the patch. Although putting a sealant is optional, the experts recommend them to be applied as it provides more durability to the pavement by acting as a protectant and sealant.

When the patch material has now dried, it is now time to put on the seal coat. You can do this by pouring the sealant in a line parallel to the garage door. After, use your squeegee to spread the sealant evenly. You can also use your old paintbrush for the edge. It is also important to note that you need to pour out the coat evenly and as thin as possible. When you are finished, leave it for at least two days and make sure that you do it when the weather is dry.

Now, that is it! You now have fixed your driveway on your own. If you are feeling no confidence in your skill on DIYs, we recommended that you seek professional help.

Submit a Comment

Your email address will not be published. Required fields are marked *